Table of Contents
Advertisement
IPC912 Series User's Manual
3.5
PCI PnP Menu
The PCI PnP menu allows users to change the advanced settings for
PCI/PnP devices.
Clear NVRAM
Use this item to clear the data in the NVRAM (CMOS).
Here are the options for your selection, No and Yes.
Plug & Play O/S
When the setting is No, Use this item to configure all the
devices in the system. When the setting is Yes and if you
install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required
for boot. The default setting is No.
PCI Latency Timer
This item controls how long a PCI device can hold the PCI
bus before another takes over. The longer the latency, the
longer the PCI device can retain control of the bus before
handing it over to another PCI device. There are several
options for your selection.
AMI BIOS Utility
43
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC912 Series and is the answer not in the manual?
Questions and answers