Table of Contents
Advertisement
IPC912 Series User's Manual
SuperIO Configuration
You can use this screen to select options for the SuperIO
Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the
screen.
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy drive
controller.
Serial Port1 Address
This option specifies the base I/O port address and
Interrupt Request address of serial port 1. The Optimal
setting is 3F8/IRQ4. The Fail-Safe default setting is
Disabled.
Serial Port2 Address
This option specifies the base I/O port address and
Interrupt Request address of serial port 2. The Optimal
setting is 2F8/IRQ3. The Fail-Safe setting is Disabled.
AMI BIOS Utility
31
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC912 Series and is the answer not in the manual?
Questions and answers