Solid-State Drive (Ssd) - HP ZBook 14u G6 Maintenance And Service Manual

Solid-state drive (SSD)

Table 5-2 Solid-state drive descriptions and part numbers
Description
2 TB, PCIe, TLC
1 TB, PCIe, TLC
512 GB, PCIe, TLC
512 GB, PCIe, Self-encrypting drive (SED), Opal 2, TLC
512 GB, SATA-3, FIPS-140-2, TLC
256 GB, PCIe, NVMe, TLC
256 GB, PCIe, NVMe, value
256 GB, SATA-3, Opal 2, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board.
2. Remove the drive by pulling it away from the connector (2).
NOTE:
Reverse this procedure to install the solid-state drive.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Bottom cover on page
M.2 solid-state drives are designed with notches to prevent incorrect insertion.
(Preparation for disassembly on page
34).
Battery on page
Spare part number
L62766-001
L62763-001
L62769-001
L62768-001
L62767-001
L64700-001
L62765-001
L64701-001
34).
46).