Transfer - NEC 900i Installation And User Manual

Transfer

Handsfree Answerback and Forced Intercom Ringing
Intercom calls you place may either ring or voice-announce at your co-work-
er's extension. What happens depends on how your co-worker's extension is
set up. You can, however, dial a code to change from one method to the other.
To change the mode of an Intercom call you placed:
1. Press 1.
Transfer
Transfer lets you quickly send the call you are on to a co-worker. You can
Transfer both Intercom and outside calls. You can use the following types of
Transfer:
Screened Transfer
Unscreened Transfer
Extension (Department)
Group Transfer
Transfer Without
Holding
Meet Me Paging
Transfer
You can also Transfer a call from the handset to your optional "desk" phone if you
need to place the cordless phone back into the desktop charger for recharging.
If you want your transferred call to automatically come back to you when your
co-worker hangs up, use Serial Call.
Transferring Outside Calls
To Transfer a call to a co-worker's extension:
1. HOLD.
2-46
If the call is ringing, this makes it voice-announce. If the
call voice-announces, this makes it ring.
Announce the call to your co-worker before
hanging up.
Transfer the call and hang up without announc-
ing it. The call rings back to you if your co-
worker doesn't pick it up.
Send the call to a Department Group instead of a
co-worker's extension. Any idle extension with-
in the group will get the call.
A co-worker presses a busy line key and waits
for you to be done with the caller. They auto-
matically get the call when you hang up. This is
a fast way to Transfer if you share an office and
you know who's on the line.
Transfer a call to a Page zone rather than a
co-worker's extension or Department Group.
Use Meet Me Paging Transfer when you're not
sure where your co-worker is.
You hear Transfer dial tone.
i-Series System