NEC 900i Installation And User Manual page 50

Speed Dial
System Speed Dial
System Speed Dial numbers are accessible from any extension. Normally only
the attendant and the system programmer can store or change the System Speed
Dial numbers. Check with your communications manager to see what your
System Speed Dial numbers are.
Using Personal Speed Dial
To store a Personal Speed Dial Number:
1. Press TALK.
2. Press #.
3. Dial Personal Speed Dial bin number (50-59, 20-29).
4. Dial line number (e.g., 01) or press a line key.
5. Dial number.
6. Press TALK or place handset in desktop charger to hang up.
To program a name for a Speed Dial number (when
your display shows PROGM NAME Y/N?):
1. Press Y to program the name, N to leave the name as it is.
2. Dial the first letter of the desired name.
3. Dial the digit (1, 2 or 3) that identifies the desire letter.
4. Repeat the above two steps for additional letters.
5. Press # when finished.
To call a Personal Speed Dial number:
1. Press TALK.
2. Dial Personal Speed Dial bin number.
2-32
Your display shows, "DSS, EXT, 6, 9, 8?".
-Your display shows, "LINE [0]-nn,9X]."
-Your first Personal Speed Dial key is bin 50; your last is
bin 29.
-If your display shows, "PROGM NAME Y/N", see instruc-
tions below for name programming.
-You may also be able to dial a line group code (9 or 90-
98) or press a loop key.
-The display shows, "TEL NUMBER".
-To enter a pause, press HOLD. To enter a flash, press
FLASH. For example, to have the system dial 9, pause and
then dial 926 5400, enter: 9 (HOLD) 9265400.
-If you press Y, the display shows the current name.
-Press * to erase a name.
To enter a blank (a space), a Q, or a Z, press 0 (zero).
You can preselect a line by then pressing a line key + CONF.
-If the number includes a pause, you can press * to force
dialing to continue.
-If you hear busy tone, press an idle line key. Your call dials
Onyx VSi System