Park - NEC 900i Installation And User Manual

Onyx VSi System
3. Make announcement.
4. Press TALK or place the handset in the desktop charger to
hang up.

Park

When you must transfer an outside call to someone you cannot readily locate,
use Park. Park puts the call in a special holding state (called an Orbit) so you
can page the person. The person you page can then pick up the call from any
extension.
There are two types of Park Orbits: System Park and Personal Park. With
System Park, you may Park a call in one of ten system orbits (60-69). With
Personal Park, you can Park a call at an extension. In either case, the call
recalls to you if not picked up.
To Park the call you are on:
(Do not hang up.)
1. Press CONF.
2. Dial Park Orbit access code.
Page Zone
All Call
1
2
3
4
5
6
7
-You hear two beeps.
-If your VS system has a PCU Module, you may have codes
for additional External Page Zones. Check with your com-
munications manager.
To use System Park, dial 60-69.
To use Personal Park, dial * and the extension number.
Access Code
1*
2*
3*
4*
5*
6*
7*
8*
Park
2-27