Table of Contents
Advertisement
T
T
C
O
RANSFER A
ALL
While you are speaking on the phone, the PSIII will
display:
Mode 1
95551212
L 1
NOTE: If Calling Party Name is not available then the calling
party number will appear in the display for Mode 2* systems.
♦ If you wish to transfer this call, press TRF key.
♦ You will now hear a special dial tone. Key in the
telephone number you wish to transfer the call to.
♦ Press END/PWR to complete the transfer. Your
PSIII will return to the standby state.
T
P
C
O
O
LACE A
ALL
(Mode 2* System Only)
While you are speaking on the phone, the PSIII will
display:
C.Cross
95551212
L 1
Mode 2*
C.Cross
95551212
L 1
-H
N
OLD
NOTE: If Calling Party Name is not available
then the calling party number will appear in the
display.
♦ Press HOLD to place call on-hold.
♦ Press L1 or L2* again to retrieve the call from
hold.
T
U
C
O
SE
OURTESY
Courtesy mode enables a PSIII incoming call to
become silent and vibration.
To Enable Courtesy Mode:
♦ Press CLEAR key and hold it down for more than
two seconds. For Mode 2* systems, PSIII
displays:
J. KRAUSER
L1:12345
L2:90000
To Disable Courtesy Mode:
♦ Press CLEAR key and hold it down for more than
two seconds.
NOTE: If DEFAULT SET or RESET ALL is invoked,
Courtesy Mode will be disabled.
10
M
ODE
Advertisement
Table of Contents
