Camp-On; Conference - NEC 900i Installation And User Manual

Onyx VSi System

Camp-On

Camp-On allows you to call a busy extension or line and wait off-hook until
that extension or line becomes free.
To Camp-On to a busy extension or line:
(Do not hang up.)
1. Dial C.
To answer a Camp-On:
(You hear two beeps while you are on a call.)
(Do not hang up.)
1. Press HOLD.
2. Press TALK.
3. Press TALK again.
To return to the first call and switch (split) between calls:
1. Press HOLD.
2. Press * and dial S (dial pad key 7).

Conference

Conference allows you to converse jointly with two inside parties, two outside
parties or one of each.
To set up a Conference:
1. Place first call.
2. Press CONF.
3. Place next call.
4. Press CONF.
-If you Camp-On to a busy extension...
You hear ringing in your handset. When the party is free,
their phone rings.
OR
-You hear two beeps and you can begin speaking.
-If you Camp-On to a busy line...
Busy tone stops. When you hear dial tone, dial your out-
side call.
Your first calls goes on Hold.
The Camp-On call rings your phone.
You are connected to the calling party.
This feature is always available.
All three parties are Conferenced.
Conference
2-17