Conference, Unsupervised; Directed Call Pickup - NEC 900i Installation And User Manual

Conference, Unsupervised

To cancel a Conference:
1. Press TALK.
OR
1. Place Conference on Hold.
2. Disconnect one of your callers.
3. Hang up on your remaining caller.
Conference, Unsupervised
Use Unsupervised Conference when you want to join two outside callers in a
Conference -- then leave the Conference and allow them to talk privately. Once
you set up this type of Conference, it continues until one of the outside callers
hangs up. You cannot rejoin the Conference or terminate it from your phone.
To set up an Unsupervised Conference:
1. Place or answer first outside call.
2. Press CONF.
3. Place or answer second outside call.
4. Press CONF again.
5. Press TALK.

Directed Call Pickup

Directed Call Pickup allows you to answer a call ringing another extension.
You may also have Call Coverage keys on your phone. You can use these keys
instead of Directed Call Pickup to answer a call to the covered extension. Refer
to the Station Call Coverage feature for further information.
To Pickup a call ringing at another phone:
(You can program this on a Feature key. Refer to "Speed Dial" for
further information.
1. Press TALK.
2. Press *.
3. Dial the ringing extension number.
2-18
If your Conference included an Intercom call, your caller
continues to converse after you hang up.
You talk to the first caller.
You talk to the second caller.
You talk to both callers.
Your callers talk privately with each other. You cannot
rejoin the Conference.
-You are connected to the caller.
Onyx VSi System