2.11 Selecting The Paper Settings; Selecting A Paper Type Setting - Oce cm4521 User Manual

2

2.11 Selecting the Paper settings

Selecting a Paper Type setting

If paper other than plain paper, such as OHP
transparencies or special paper, is loaded in a paper
tray, be sure to change the paper type setting for that
tray.
The following procedure describes how to specify the
setting for special paper loaded into the bypass tray.
Note
There are limits on the types of paper that can be loaded
in a paper tray. For details on the types of paper that can
be loaded, refer to the User's Guide [Copy Operations].
Reminder
If special paper is loaded into a paper tray, be sure to
select the corresponding paper type for that tray,
otherwise a paper misfeed may occur.
2-40
Using copy functions
cm4521