Original Settings - Oce cm4521 User Manual

3
4
Touch [OK], and then touch [OK] in the next
screen that appears. Otherwise, touch [Main
Screen].

Original Settings

Select the binding position and orientation of the
document.
Parameter
Original
Direction
Binding
Position
3-38
Description
Select the orientation of the document. After
the document is scanned, the data is
processed so that it is correctly oriented.
For details on selecting the document
orientation, refer to "Selecting the document
orientation (Original Direction settings)" on
page 1-28.
Select the binding position, for example,
when holes are punched in the document or
the document is stapled. In addition, specify
the binding position when a double-sided
document is loaded.
This adjusts the scan of double-sided
documents so that the binding position is not
reversed.
Left: Select this setting for a document with a
binding margin on the left side.
Top: Select this setting for a document with a
binding margin at the top.
Auto: The binding margin is on the long side
if the page is 11-11/16 inch (297 mm) or less,
or it is on the short side if the page is more
than 11-11/16 inch (297 mm).
Using fax/scanning functions
cm4521