Oce cm4521 User Manual page 66

Using copy functions
Setting
Center Staple
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out
and sorted in an alternating crisscross pattern.
– 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size)
paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The "Auto" Paper setting is selected.
– The "Auto" Paper setting is not selected when the
"Mixed Original" setting is selected.
*2
If a Staple setting is selected, the "Collate (By Set)"
setting is automatically selected. The "Offset"
setting cannot be selected at the same time that a
Staple setting is selected.
*3
The Staple settings are available only if the optional
finisher is installed.
*4
The Punch settings are available only if punch kit
CM5520010 is installed on finisher 9834 or finisher
9833 or if punch kit 9278 is installed on finisher
9821.
cm4521
Description
*7
Select this setting to staple copies at two
places along the center.
2
2-23