Oce cm4521 User Manual page 91

2
Setting
*3
Custom Size
*1*4
Wide Paper
*1
Settings can be specified for trays 1 and 2. In
addition, [12-1/4×18 w] is available.
*2
If paper other than the specified paper size is
loaded, a paper misfeed may occur since the paper
size is not automatically detected.
*3
In order to specify a custom paper size in Enlarge
Display mode, the custom paper size must first be
stored before entering Enlarge Display mode. For
details, refer to the User's Guide [Copy Operations].
*4
Wide paper is a size larger than the standard size
and allows copies of standard-sized documents to
be printed so that there is no loss at the edges. For
example, if 11 × 17-wide (A3 wide) paper is used, an
area up to 12-1/4 inch × 18 inch (311.1 mm × 457.2
mm) can be printed, allowing the entire area of an 11
× 17-size (A3-size) document to be printed.
The following procedure describes how to specify the
size of the paper loaded into the bypass tray.
2-48
Description
A custom paper size can be set so that the
paper tray is used specifically with the
selected paper size.
A wide paper size can be set so that the
paper tray is used specifically with the
selected paper size.
Using copy functions
cm4521