Using copy functions
– If "1 > 2" or "2 > 2" is selected, touch [Output
Bind Direction], select the binding position for the
copy, and then touch [OK].
– If the binding position for the copy is set to
"Auto", the binding position is set at the top or on
the left side. The binding position is automatically
determined according to the orientation of the
loaded document. If the document length is 11-
11/16 inch (297 mm) or less, a binding position
along the long side of the paper is selected. If the
document length is more than 11-11/16 inch (297
mm), a binding position along the short side of
the paper is selected.
4
Touch [Close].
The Basic screen appears again.
cm4521
2
2-19