Selecting The Position Of The Binding Margin (Original Binding Position/Binding Position Settings) - Oce cm4521 User Manual

Before use
Selecting the position of the binding margin
(Original Binding Position/Binding Position
settings)
If a double-sided document is loaded into the ADF,
specify the position of the top of the back side of the
document by specifying the binding margin position for
the document.
Setting Description
Left Select this setting if the document is loaded with the
binding margin at the left.
Top Select this setting if the document that is loaded has
a binding margin at the top.
Right Select this setting if the document is loaded with the
binding margin at the right.
Auto With this setting, the binding margin is set at the top
or at the left.
Select this setting to automatically select the
position of the binding margin.
If the document length is 11-11/16 inch (297 mm) or
less, a binding position along the long side of the
paper is selected.
If the document length is more than 11-11/16 inch
(297 mm), a binding position along the short side of
the paper is selected.
1
Position the document to be copied.
– For details on positioning the document, refer to
"Feeding the document" on page 1-17.
cm4521
1
1-31