Selecting The Finishing Method - Oce cm4521 User Manual

2
*5
The number of punched holes differ depending on
the country (region) where the unit is installed. For
details, consult your technical representative.
*6
The Half-Fold, Center Staple & Fold and Tri-Fold
settings are available only if optional finisher 9834 is
installed.
*7
The "Half-Fold" and "Center Staple" settings are
available only if the saddle stitcher is installed on
finisher 9821.
Follow the procedures described below to select
Finishing settings.

Selecting the finishing method

1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2-24
Using copy functions
cm4521