Specifying A Destination - Oce cm4521 User Manual

Using fax/scanning functions
3.2

Specifying a destination

!
Detail
Destinations must first be registered in Utility mode. Fax
transmission destinations can also be registered. For
details on registering destinations, refer to the User's
Guide [Network Scanner Operations], the User's Guide
[Fax Operations] and the User's Guide [Network Fax
Operations].
The scan data can be sent in any of the following ways.
Scan operations
Method
Scan to E-mail
Scan to FTP
cm4521
Description
The Scan to E-Mail operation is used to send
scan data to a specified E-mail address as a
file attachment.
The Scan to FTP operation can be used in a
network environment that contains an FTP
server. The scan data can be sent to a folder
specified on an FTP server on the network.
This is suitable for transmitting large-sized
data, such as high-resolution data.
Transmission may not be possible if
limitations have been placed on the
document name according to the destination
server conditions. Since the scanning
settings are used, consult your network
administrator when specifying the document
name.
3
3-5