Enabling And Disabling Remote Access - 3Ware 9650SE-2LPML User Manual

Chapter 6. 3DM 2 (3ware Disk Manager) Introduction

Enabling and Disabling Remote Access

78
• will send e-mails for all events
Information
• will send e-mail for events with severity of Warning and Error.
Warning
• will send e-mail for events with severity of Error only.
Error
Events are listed on the 3DM
Event notification can be set up during 3DM installation, and can be changed
on the 3DM 2 Settings page.
To set up event notification
1 Click 3DM 2 Settings
2 In the E-mail Notification
change the settings you want.
• Enable or Disable all notifications.
• Set the severity level of events for which e-mail notifications are sent.
• Specify the email address of the sender. This will appear in the
"From" field of the e-mail.
• Enter the e-mail address(es) to which notifications are sent. (Separate
multiple addresses with a comma (,) or a semicolon (;).
• Enter the SMTP server name or IP of the mail server for the computer
where the 3ware controller is installed.
• If your email server requires authentication, enter the Mail Server
Login and Password.
3 Click
Save E-mail Settings
To send a test message
You can send a test message to make sure you've entered the e-mail
notification settings correctly.
• Click Send Test Message
When remote access is enabled, a user can connect to 3DM over the internet
or an intranet, to check status or administer the controller and associated
drives. (See "Viewing 3DM Remotely Using a Web Browser" on page 71.)
If remote access is disabled and a user attempts to connect to 3DM remotely,
they will see the following error message: "Remote Access to 3DM has been
disabled. Please connect using the local machine by entering "localhost" in
the URL bar."
Remote access can be enabled or disabled on the 3DM 2 Settings page.
Alarms page.
on the menu bar.
section of the 3DM 2 Settings page, enter or
.
.
3ware Serial ATA RAID Controller User Guide