3Ware 9650SE-2LPML User Manual page 144

Chapter 9. Maintaining Units
134
The next figure illustrates how you can drill down to get additional detail
about units and drives in your system.
Figure 58. Drilling Down to Check Status Information
For some RAID levels (RAID 6, RAID 10, and RAID 50), a single RAID unit
may have more than one status. For example, part of the unit could be
rebuilding, while another part is degraded or initializing. When this is the
case, you will see both statuses listed at the top unit level. When you drill in to
see details, you will be able to see which the specific subunits or drives to
which the status applies.
For an explanation of unit and drive status, see:
• "Unit Statuses" on page 135
• "Drive Statuses" on page 137
If you use a 3ware Sidecar or an enclosure that
3ware CCU (chassis control unit),
provide some status information. For details, see "Enclosure LED Status
Indicators" on page 135.
has an integrated AMCC/
the LEDs on your enclosure also
3ware Serial ATA RAID Controller User Guide