Drive Information Page - 3Ware 9650SE-2LPML User Manual

Chapter 11. 3DM 2 Reference

Drive Information page

192
Figure 92. Drive Information Page
The Drive Information page appears when you choose
from the menu bar, or when you click a port # on the Unit Details
Information
page. If you arrive at this page from the port # hyperlink on the Unit
Information page, the line showing the port # you clicked on is highlighted.
This page shows a list of drives on the current controller and a summary of
each one.
To see additional detail about a particular drive in the Drive Details window,
including the SMART data, whether NCQ is supported and enabled, and the
SATA Link speed, click the link in the Port # column.
The port to which the drive is connected.
Port #.
Model. The model of the drive.
The physical capacity of the drive. (Note that the capacity as shown
Capacity.
on 3DM screen is calculated as 1KB = 1024. This amount may differ from the
capacity that is printed on the disk drive, where it typically has been
calculated as 1K = 1000. Consequently, the capacity of the drive may appear
smaller in the 3DM screens. No storage capacity is actually lost; the size has
simply been calculated differently for consistency.)
The serial number of the drive.
Serial #.
The firmware version of the drive.
Firmware.
The unit the drive belongs to, if applicable.
Unit.
Status. The status of the drive: OK, Not Supported, Not Present, and so forth.
If you need help regarding a status displayed here, please contact Technical
Support. For more information, see "Drive Statuses" on page 137.
Information > Drive
3ware Serial ATA RAID Controller User Guide