3Ware 9650SE-2LPML User Manual page 109

www.3ware.com
8 (Optional) through the policy fields and make any appropriate
Tab
changes to the settings for:
• Write Cache Setting
• Drive Queuing Mode
• Continue on Error During Rebuild
• StorSave Policy
For details about these settings, see "Configuration Options When
Creating a Unit" on page 92.
9 (Optional) to the field
Tab
size for the boot volume (volume 0) in gigabytes; then press
to set the size.
10 Tab to the OK button and press Enter to confirm creation of the unit.
11 If the volume summary screen appears, review the information and press
any key to continue.
Multiple volumes will be created if you entered a Boot Volume Size of
greater than zero (0), or if auto-carving is enabled and the combined size
of the drives in your unit is large enough to divide it into multiple
volumes.
If you are not satisfied with how the volumes will be split up in the unit,
delete the unit from the main 3BM screen and recreate it using a different
Boot Volume Size. If desired, you can change the auto-carving policy or
the carve size on the Policies page. For more information, see "Using
Auto-Carving for Multi LUN Support" on page 86.
You are returned to the main 3BM screen.
Note:
The unit is not actually created and no data is overwritten until
you have finished making all your changes and press
Configuring a New Unit
, press
Boot Volume Size
and type the
Enter
Enter again
.
F8
99