3Ware 9650SE-2LPML User Manual page 163

www.3ware.com
Figure 64. Degraded Disk Array Warning Message
2 Press a key to continue.
3 If your degraded unit has a drive indicated as
still be usable. Try rebuilding with the
select the unit (highlight it and press
button.
Unit
4 When the confirmation screen appears, confirm that you selected
Rebuild
the correct unit by selecting
5 Press to save your changes and exit 3BM
F8
rebuilding after the operating system finishes loading.
If the rebuild fails and you have no available drives, do one of the following:
• If your system has hot-swap carriers, you can replace the failed or
Use drive and rescan (Alt-R) the unit.
• If your system does not have hot-swap carriers, power down the system
and replace the failed or
restart 3BM.
Then follow these steps:
1 At the main 3BM screen, highlight an available drive to replace the
faulted drive and press
An asterisk appears in the left most column to indicate the drive is
selected.
2 Press to select the degraded unit and press
Tab
3 Tab to the Maintain Unit
4 Select Rebuild from the pop-up menu and press
Not in Use
Not in Use
Enter ) and then select the
.
OK
The unit will begin
.
drive. Then power on the system and
Not In Use
Enter to select it.
button and press Enter
Background Tasks
, the drive may
drive intact. Simply
Rebuild
Not In
to select it.
Enter
.
Enter .
153