Features - Omron SYSMAC C200H-IDS01-V1 Operation Manual

Features

1-2

Features

Seven Dedicated
Commands
Monitoring with the
Handheld Programming
Console
Storage of Error
Information
Compatibility
ID Sensor
V600-H@@ R/W
C200H-IDS01-V1 Yes
C200H-IDS01 Yes
C200H-IDS21 No
Differences between
C200H-IDS01 and
C200H-IDS01-V1
The ID Sensor systems have the following features:
Data is transferred between the ID Sensor Unit and the Data Carrier with the
following six dedicated commands:
Read
Write
Auto Read
Auto Write
Clear-all
Auto Read/Write Abort
Data management (C200H-IDS01-V1 only)
Up to 1024 bytes of data can be read from or written to the Data Carrier at
one time. Clear-all clears all data in the Data Carrier's memory (2K bytes).
These commands are compatible with the V600 and V620 ID Controllers.
The Handheld Programming Console can be used for monitoring data transfer
as well as errors that have occurred during operation. A keyboard sheet for
the Handheld Programming Console is included with the ID Sensor Unit.
Error information is stored in the internal memory of the ID Sensor Unit. A
built-in capacitor stores the information for 15 days (at 25 ° C).
The following table lists the compatibility between the I/D Sensor Unit and the
R/W Head, R/W Antenna, or Data Carrier.
Electromagnetic induction
V600-D@@R@@
Head Data Carrier (with
built-in battery)
Yes
Yes
No
Note Refer to the list of applicable manuals in the About this Manual section.
The C200H-IDS01-V1, which is an updated version of the C200H-IDS01, has
the following three new features in addition to all the capabilities that the
C200H-IDS01 possesses. The C200H-IDS01 is compatible with the C200H-
IDS01-V1.
1,2,3... 1. Connecting to Data Carrier Incorporating EEPROM
The C200H-IDS01-V1 reads data from and writes data to the V600-D@@P@@
containing an EEPROM. To read data, the user can select the communica-
tions distance priority mode or communications speed priority mode with the
local communications mode pin (pin 3 of the DIP switch). Neither of these
modes are, however, available when the ID Sensor Unit is connected to the
SRAM Data Carrier.
V600-D@@P@@
Data Carrier (with
no built-in
battery)
Yes
No
No
1
2
3
Local communications mode pin
4
Microwave
V620-H@@ R/W V620-D@@R@@
Antenna Data Carrier (with
built-in battery)
No No
No No
V620-H01/-H02 V620-D8KR01
Section 1-2
3