Simulating Routes; Route Preview - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
Tap on Show route.
►
The map opens in Preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
7.4.7

Simulating routes

It is also possible simply to simulate navigation on a planned route.
Note: GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
1. Tap on Options > Simulation.
►
2. Tap on the button of the route on which you want to simulate the
navigation.
For more details about the MyRoutes function refer to the chapter
"MyRoutes" on page 57.
Stopping simulation
You can stop simulation at any time.
Tap on
►
The R
7.4.8

Route preview

You have calculated and displayed a route. The map is open in
Preview mode.
Route profile
Route profiles take account of the characteristics and special aspects of
the different modes of transport. For example a route profile for bicycles
will exclude motorways from the route calculation but will include roads
which other vehicles are not allowed to use. And a bicycle profile will
calculate different arrival times than a motorcycle profile.
Note: If you select a pedestrian profile, a type of navigation specially
developed for pedestrians will be started (see "Navigation in Pedestrian
mode" on page 70).
- 56 -
If you have planned a route with only one route point and the
MyRoutes function is activated, you will be prompted to select
a route for the simulation.
The route will be recalculated for simulation purposes.
(Back).
OUTES AND TRACKS
window opens.
Navigation