Navigation In Track Mode; Navigation In Offroad Mode - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
Zoom in: The map section becomes smaller, but you will see more
details.
Centre the position: During pedestrian navigation you can shift the
visible map section in order to view the surrounding area on the map.
This may mean that your current position can no longer be seen on the
visible section of the map.
Tap on the Centre the position button if your current position can no
►
longer be seen on the visible section of the map.
Your current position will be shown again on the map.
Recalculate route: Recalculates the route. Use this function if you have
wandered far from the calculated route and would like a new route
proposal.
9.4.3

Navigation in Track mode

This mode becomes active if you have planned a route with a track for
the navigation (see "Tracks and multi-leg routes" on page 52).
After the route was shown in Preview mode, navigation was started.
First the navigation guides you from your current location to the
beginning of the loaded track. This navigation corresponds to the
navigation of the selected route profile (see "Navigation in Vehicle
mode" on page 66 and "Navigation in Pedestrian mode" on page 70).
As soon as the first recorded point of the track is reached, the
navigation switches to Track mode.
Navigation in Track mode works like navigation in Pedestrian mode
(see "Navigation in Pedestrian mode" on page 70).
There are only a few differences:
The Recalculate route function is not available.
►
If more route points follow after the track, the navigation will switch
►
back to the originally selected mode.
9.4.4

Navigation in Offroad mode

Note: This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
Nor does it become active if you are navigating along a track (see
"Navigation in Track mode" on page 72).
- 72 -
(Pedestrian) symbol.
Working with the map