Map Options In Navigation Mode; Quitting Navigation; Map In Destination Search Mode - Garmin SEAT Portable System User Manual

If you enter a destination which lies off the digitalised road system, the
navigation will guide you first in Vehicle mode to the point of the
digitalised road system that lies nearest to the destination. From here
the navigation then continues in Offroad mode.
If the current position at the beginning of navigation lies off the
digitalised road system, the navigation will guide you first in Offroad
mode to the nearest point of the digitalised road system. From here the
navigation then continues in Vehicle mode.
Navigation in Offroad mode works like navigation in Pedestrian mode
(see "Navigation in Pedestrian mode" on page 70).
There are only a few differences:
The part of the route already covered is not shown.
►
The Recalculate route function is not available.
►
9.4.5

Map options in Navigation mode

Tap on Options.
►
A window with several buttons opens.
The most important functions for navigation can be reached via buttons
with symbols.
Other functions are found by tapping on one of the buttons Destination,
Route, Services or General.
A description of all available options can be found in the chapter
"Options, more functions" on page 59.
9.4.6

Quitting navigation

You quit the navigation in the same way in all modes:
Tap on
►
prompt you to confirm.
9.5

Map in destination search mode

In destination search mode you can search for a destination or an
interim destination for navigation. If you are in the process of navigation,
you can show the whole route.
Tap on
►
map.
The map opens in destination search mode.
The map is always in destination search mode, when a pair of cross
hairs are to be seen. Indicated in the address box are the coordinates
and, where applicable, the name of the street under the cross hairs.
Working with the map
User's manual SEAT Portable System
(Back) in order to quit navigation. A dialog box will
(destination search) at the bottom edge of the
- 73 -