Loading Routes Or Tracks; Calculating And Displaying Routes - Garmin SEAT Portable System User Manual

3. Tap on
If a route has already been saved under this name, you will be
notified accordingly.
►
►
The destination is now saved to the S
The dialog window closes.
7.4.5

Loading routes or tracks

1. Tap on Options > Saved routes and tracks.
The S
routes and tracks in alphabetical order.
A symbol in front of the name indicates whether it is a route (
or a track (
If you want to load a route:
2. Tap on the route that you want to load.
3. Tap on
The R
route points of the loaded route have been entered. When
navigation starts, the starting point is replaced by the current
position. You will now be guided to the first route point.
If you want to load a track:
2. Tap on the track that you want to load.
3. Tap on Load track.
The R
entered as the starting point. The loaded track is entered as route
point '1'. The navigation system will then guide you first to the
starting point of this track.
For details about navigating along recorded tracks refer to chapter
"Navigation in Track mode" on page 72.
7.4.6

Calculating and displaying routes

It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The R
least one route point have been entered.
Navigation
Tap on Yes to overwrite the route
- or -
Tap on No if you want to enter a different name.
AVED ROUTES AND TRACKS
).
OUTES AND TRACKS
OUTES AND TRACKS
OUTES AND TRACKS
User's manual SEAT Portable System
(Save).
AVED ROUTES AND TRACKS
list opens. It shows all the saved
(Load route).
window opens. The starting point and the
window opens. The current location is
window is open. The starting point and at
list.
)
- 55 -