Screensaver; Switching The Device To Standby Mode; Switching Off The Device; Starting The Navigation Device For The First Time - Garmin SEAT Portable System User Manual

Forgotten your password?
It can happen that you activate the password but are then unable to
remember it.
If you forget your password, follow the procedure described in
►
"Forgotten your password?" on page 22.
3.2.2

Screensaver

When the navigation device is not being supplied with power from the
vehicle, the screensaver is not available.
3.2.3

Switching the device to standby mode

Press briefly on the
►
- or -
In the S
►
A message will appear telling you that the device will be switched to
standby mode in several seconds.
Wait for the device to be switched to standby mode or tap on
►
Standby.
3.2.4

Switching off the device

Press the
►
switches off (approx. 5 seconds).
- or -
1. Press briefly on the
A message will appear telling you that the device will be switched to
standby mode in several seconds.
2. Tap on Switch off.
3.3

Starting the navigation device for the first time

When you switch on the navigation system for the first time, you will be
asked to make the following settings:
your preferred language for using the software
►
►
the unit of length for distances
►
the time format
►
the date format
►
the unit for temperature values
►
Switching the navigation device on and off
window tap on
TART
(On/Off) key and keep it pressed until the device
consideration of fast-charging stations
User's manual SEAT Portable System
(On/Off) key.
(Switch off).
(On/Off) key (max. 1 second).
- 19 -