Operating In Destination Search Mode - Garmin SEAT Portable System User Manual

9.5.1

Operating in destination search mode

1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap on
Buttons with various functions will be displayed.
Take me there: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
MyReport: Opens the M
Garmin Würzburg about any changes to traffic monitoring systems and
routing.
Interim destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue navigation to your original destination.
This function is only active during navigation.
Add to route: Adds the selected point to the route planning as the last point.
Navigation will then continue to this point after you have reached the
original destination or the other route points.
Save: Opens the S
which the selected point will be saved in the F
"Saving destinations" on page 49).
Search nearby: Opens the POI N
destinations near the selected point (see "POI nearby" on page 39).
Tap on
►
You will be returned to the window from which you started this
mode.
Working with the map
(OK).
R window. Here you can notify
Y EPORT
AVE DESTINATION AS
EARBY
(Back) in order to quit destination search mode.
User's manual SEAT Portable System
window. You can enter a name under
AVOURITES
window. Here you can search for
list (see
- 75 -