Managing Destinations; Saving Destinations - Garmin SEAT Portable System User Manual

Note: Traffic information (TMC) is then available to a limited extent
only.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "Waiting for GPS-Signal..."
You have the following options:
Wait. As soon as GPS reception is good enough for determining
►
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The window in which you entered your destination
►
will open again. Your destination is saved in the L
list.
Tap on Demo. The route will be calculated using the centre of the
►
destination location as starting point. Navigation will then be
simulated on this route.
Tap on
Note: If you selected the destination on the map, then the Demo button
is not available.
7.3

Managing destinations

Every destination you enter and destinations from the L
DESTINATIONS
F
AVOURITES
particular destination.
Note: Favourites are indicated on the map by a small flag with their
name.
7.3.1

Saving destinations

1. Enter a destination (see "Entering a destination address " on
page 36 or "Points of interest" on page 39). Do not tap on the Start
navigation button!
2. Tap on Options > Save destination.
- or -
1. Select a destination from the L
I
MPORTED ADDRESSES
"Imported addresses from the phone book" on page 45). Do not tap
on the Start navigation button!
2. Tap on Options > Save as favourite.
3. Enter a name for the destination.
Navigation
(Back) in order to close the demonstration.
and I
MPORTED ADDRESSES
list. This makes sense if you frequently navigate to this
list (see "Last destinations" on page 45 or
User's manual SEAT Portable System
lists can be saved in the
AST DESTINATIONS
AST DESTINATIONS
AST
list or from the
- 49 -