Making A Call; Making A Call With The Voice Commands Function - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
When you receive a text message (SMS), a signal tone will sound and
the I
NCOMING TEXT MESSAGE
which connected telephone received the text message.
The name and the number of the sender will be displayed if this
information is available. (If the sender's number is displayed but does
not exist in the phone book, Unknown number will be displayed
instead of the name. If the number is suppressed, Anonymous will be
displayed.)
Tap on Read if you want to read the text message now.
►
The T
Note: The navigation system will also read out the text to you when the
window is opened. Reading out text messages is not possible in all
languages however.
Tap on Cancel if you want to read the message later.
►
Note: You can also choose not to have incoming text messages read
out immediately (see "Settings" on page 156).
You can however open the list of received text messages at any time to
check whether you have received any new text messages (see
"Opening the mailbox" on page 154).
13.4

Making a call

With the hands-free module you can make a call in various ways:
13.4.1

Making a call with the voice commands function

It is particularly convenient to make a call with the voice commands
function.
1. In the H
you want to use to make the call (see "Activating a mobile phone"
on page 147).
2. In the H
Then say "Call".
►
The V
Specifying a phone number
3. Say "Telephone number".
Say the number that you want to call.
Note: You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
- 150 -
window opens. You can then read the text message.
EXT
ANDSFREE MODULE
ANDSFREE MODULE
window opens.
OICE COMMAND
window will open. The header line shows
window activate the mobile phone which
window tap on Voice command.
Handsfree module