Trip Computer; Opening The Trip Computer; Selecting The Period - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
11.1

Trip computer

The trip computer presents your vehicle's travel and consumption data.
11.1.1

Opening the trip computer

1. If necessary, tap on
window.
2. In the S
The T
The trip computer presents the following data:
Average speed
►
Distance driven
►
Remaining range
►
Average consumption
►
Driving time
►
Current consumption
►
is indicated. To receive separate values for the range with CNG and
the range with petrol, tap on the
On the button at the bottom edge of the screen you can see whether
the indicated data are for the current trip (Since start) or for the period
since the data were last reset (Long term).
11.1.2

Selecting the period

In the T
with Since start or with Long term).
Select the period for which you want the data to be presented.
Since start: This period corresponds to the memory 1 of the
►
multifunction display of the combination instrument. This period will
always begin again when the ignition has been off for 2 hours or
more.
Long term: This period corresponds to the memory 2 of the
►
multifunction display of the combination instrument. It always begins
anew when one of its maxim,um values is exceeded. For details
please refer to your vehicle's operating manual.
- 112 -
window, tap on Car info > Trip computer.
TART
window opens.
RIP COMPUTER
For vehicles which are equipped to run on CNG, the full range
window tap on the Period button (it is labelled
RIP COMPUTER
(Main menu) to open the S
(Info) symbol.
TART
Car info