Bluetooth Connection; Searching For And Pairing Bluetooth Devices - Garmin SEAT Portable System User Manual

3 Speed Call buttons. See "Preset" on page 155.
4 Back to the previously opened window.
5 Opens the T
are connected to the hands-free module (see "Connecting to a device"
on page 145).
6 If you press this button, you will be returned to the S
The following labelled buttons are also visible:
Keyboard: Opens the keypad on which you can dial phone numbers (see
"Dialling a telephone number" on page 151).
Phone book: Opens the phone book of the active telephone (see "Calling a
contact from the phone book" on page 152 and "Navigating to a contact
from the phone book" on page 154).
Recent calls: Opens the recent calls of the active telephone (see "Calling most
recently dialled, received or missed numbers" on page 152).
Voice command: Opens the V
call by voice commands (see "Making a call with the voice commands
function" on page 150).
Note: If there is no connection to a mobile phone or if the voice
commands function is not available for the language of the user
interface, the Settings button will be shown instead of the Voice
command button.
13.1

Bluetooth connection

To be able to use the hands-free module of the navigation device, it
must be connected to at least one Bluetooth device.
Note: Both the navigation device and the mobile phone must be
configured accordingly in order for a Bluetooth connection to be set up
between the two devices.
For details of how to configure the navigation device refer to the chapter
"Settings" on page 156.
For details of how to configure the mobile phone refer to the related
manual issued by the manufacturer.
13.1.1

Searching for and pairing Bluetooth devices

Pairing is the term used for setting up a coded connection between two
Bluetooth devices. This requires each of the two devices to send the
same password to respectively the other device. The password and the
connection data are saved on both devices, which means that pairing is
necessary once only when the connection is set up for the first time.
Paired devices are saved in the T
Handsfree module
window. Here you can enter which devices
RUSTED DEVICES
OICE COMMAND
User's manual SEAT Portable System
window in which you can initiate a
list.
RUSTED DEVICES
window.
TART
- 143 -