Working With The Map; Selecting The Navigation Map; Map In Standard Mode - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
9

Working with the map

9.1

Selecting the navigation map

Each country has its own navigation map. However, seamless
navigation over several countries on one continent is possible if a
continuous route can be planned on the maps saved.
Even if maps of countries in other continents are available on the
navigation device, it can only ever work with the maps of a single
continent.
Tap in the N
►
display in order to see which maps are currently in use. Here you
can also select a different continent if the navigation device
contains any maps of countries on other continents.
9.2

Map in Standard mode

The map is always in Standard mode when you are not navigating,
have not calculated a route and are not searching for a destination on
the map.
Under the following circumstances the map switches automatically to
Standard mode:
You begin a trip while the N
►
takes place after only a short while.
You reach the destination of a navigation in Vehicle mode.
►
To open the map:
In the N
►
- or -
If the voice commands function is available on your navigation
device and for your language:
In the N
►
Note: If GPS reception is not good enough to establish your location, the
map will be opened in destination search mode.
- 62 -
window on More functions > Settings > Map
AVIGATION
window tap on Show map.
AVIGATION
window tap on More functions > Show map.
AVIGATION
window is open. The switch
AVIGATION
Working with the map