Device Mounted In The Vehicle; Switching On The Device; Screensaver - Garmin SEAT Portable System User Manual

Off: When you switch off the device, it consumes no energy. It can
►
then take several months for the battery to become flat. Switching
the device on again triggers a restart which can take some time
(approx. 60 seconds). Your settings and your saved destinations
and routes will be retained.
The procedure for switching the navigation device on and off depends
on whether it is mounted in the vehicle or not.
3.1

Device mounted in the vehicle

When the navigation device is mounted in the vehicle, it does not need
to be switched on or off.
3.1.1

Switching on the device

The navigation device switches on when you switch on the ignition.
Note: The device also switches on when it is fitted in the vehicle while
the ignition is already on.
If the navigation device was previously set to standby, the window
which was last visible will appear.
If the device was previously switched off, it will take several seconds for
the software to be started again. The S
If you want to switch on the device with the engine off, press and hold
the
3.1.2

Screensaver

Switching on the screensaver
The screensaver is available only under the following conditions:
The device is mounted in the vehicle and is on.
The vehicle's ignition is on.
Press briefly on the
►
- or -
In the S
►
The screensaver will appear. On it you can see the date, the time and
the outdoor temperature.
Switching the navigation device on and off
(On/Off) key until the device switches on.
window tap on
TART
User's manual SEAT Portable System
window then appears.
TART
(On/Off) key.
(Switch off).
- 17 -