Navigation - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
Select the tasks for which you want to use Voice Command:
►
►
►
For details of how to enter a destination using voice commands refer to
the chapter "Entering a destination by voice commands" on page 35.
For details of how to make a call using voice commands refer to the
chapter "Making a call with the voice commands function" on page 150.
The volume of the voice commands assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the input requests when you have muted the
navigation instructions.
1. In the N
General > Volume of the assistant.
2. Select the volume for the assistant.
Note: For details of how to configure the navigation system refer to the
chapter "Configuring the navigation system" on page 163.
7

Navigation

Use the navigation system at your own risk.
Caution! Be sure to refer to all the safety information in the chapter
"Important safety information" on page 11.
Impaired GPS reception
If GPS reception is impaired (e.g. because you are in a tunnel),
navigation will be continued. The navigation system will then calculate
your likely position from the route data and your previous driving profile.
As soon as GPS signals are received again, navigation will be
continued with real GPS data.
Arriving at your destination
When you have reached your selected destination, a message to this
effect will be displayed.
Only your current position (red arrow) and the destination flag will now
be shown on the map.
- 32 -
Complete: You can use all the voice command functions.
Answering: You can enter addresses and answer questions
asked by the navigation device.
Entering addresses: You can enter only addresses with the
voice command function.
window tap on More functions > Settings >
AVIGATION
Navigation