Activating A Mobile Phone; Deleting Devices - Garmin SEAT Portable System User Manual

13.1.4

Activating a mobile phone

If the hands-free module is connected to two mobile phones, you can
select in the H
telephone.
If you want to call someone, the call will be made via the active phone.
Incoming calls and text messages on the inactive telephone will be
announced however and can be taken.
Recent calls and the phone book of the inactive telephone are not
available.
You can activate only one connected telephone.
Tap on the
►
the corresponding mobile phone.
The button of the active phone has a "pressed" look. The name of
the active phone is shown to the right of the buttons.
If no mobile phone is connected yet as "Phone 1" or as "Phone 2", the
symbol on the corresponding button will appear in white. If you tap on
the symbol, the T
connect a mobile phone to the hands-free module (see "Connecting to a
device", page 145).
13.1.5

Deleting devices

You can delete the connection data of paired devices. The device is
then no longer shown in the T
phone book or recent calls from this device, these data will be deleted
from the navigation device.
1. In the H
The T
2. Tap on Options > Delete device.
The D
3. Tap on the
want to delete.
You will be requested to confirm deletion.
4. Tap on Delete.
The device is deleted from the T
Handsfree module
ANDSFREE MODULE
(Phone 1) or
RUSTED DEVICES
ANDSFREE MODULE
window opens.
RUSTED DEVICES
window opens.
ELETE DEVICE
(Delete device) button to the right of the device you
User's manual SEAT Portable System
window which is to be the active
(Phone 2) button to activate
window will open. There you can
list. If you imported the
RUSTED DEVICES
window tap on
RUSTED DEVICES
(Trusted devices).
list.
- 147 -