Sightseeing Tours - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
10.8

Sightseeing tours

Sightseeing tours are predefined routes with destinations of scenic,
cultural or touristic interest which are sorted according to various
categories.
Note: The navigation software contains only a limited number of
sightseeing tours. An update with more than 100 sightseeing tours can
be purchased via Fresh. You can download the Fresh software free of
charge from the website www.garmin.com/pid.
1. In the N
tours.
The S
2. Enter the country in which you want to search for sightseeing tours
(refer to "Specifying a destination" on page 34).
3. Select a category from which you would like to find a route.
The N
sorted alphabetically.
4. Tap on the name of the route.
The D
It shows the name of the route, the length of the route, the
estimated driving time and a short description of the route.
►
Tap on Close to reopen the D
On the Begin at... button you are told at which route point the route
starts:
First: You are guided from your current position to the advised
►
starting point of the sightseeing tour. Navigation on the selected
tour then begins.
Nearest: You are guided from your current position to the most
►
favourable starting point for the selected tour. Navigation on the
selected tour then begins.
The most favourable starting point is
►
►
5. Tap on Begin at... in order to select the alternative setting.
6. Tap on Plan route.
The R
multi-leg routes" on page 52).
Here you can obtain an overview of the various legs of the selected
tour and of the order the legs will follow.
- 92 -
window tap on More functions > Sightseeing
AVIGATION
IGHTSEEING TOURS
list opens. It contains routes from the specified category,
AME
ETAILS OF THE ROUTE
Tap on Info to receive a detailed description of the route.
for a round trip: the nearest point on the route.
for any other trip: the nearest end point (start or destination) of
the route.
OUTES AND TRACKS
window opens.
window opens.
ETAILS OF THE ROUTE
window will open (see also "Tracks and
window.
Useful functions