Table of Contents
Advertisement
Reviewing Laps
The Laps page lets you review lap time and speed information
for each lap. You can compare any two laps from the same
session.
From the session summary page, select Laps.
Laps
Select to view a map of your track position during
Position
the lap.
Select to view a map showing your speed at
Speed
different points during the lap.
Select to view a map showing rates of
Accel./Decel.
acceleration or deceleration at different points
during the lap.
Select to compare the selected lap with another
Compare
lap.
Use the touchscreen controls
Track map
Touchscreen, page
lap data.
Displays the lap time, top speed and average
Time and speed
speed.
information
Select to view a video of the selected lap.
Video thumbnail
Viewing Lap Speed Data
You can view a map of detailed speed data at different points
during the lap.
1
From the session summary page, select Laps.
2
Select a lap.
3
Select Speed.
Viewing Acceleration and Deceleration Data
You can view a map of detailed acceleration data at different
points during the lap.
1
From the session summary page, select Laps.
2
Select a lap.
3
Select Accel./Decel..
Comparing Laps
You can compare any two laps from the same session.
1
From the session summary page, select Laps.
2
Select a lap.
3
Select Compare.
4
Select a lap and select OK.
Settings
Connecting to a Wireless Network
1
Select
> Wi-Fi.
2
If necessary, select the toggle switch to turn on wireless
network technology.
Settings
(Using the
4) to adjust your view of the
3
Select a wireless network.
4
If necessary, enter the encryption key.
The device connects to the wireless network. The device
remembers the network information and connects automatically
when you return to this location in the future.
Enabling Bluetooth wireless technology
Select
> Bluetooth.
Pairing a wireless headset or car stereo
1
Place your headset and your Garmin Catalyst device within
33 ft. (10 m) of each other.
2
On your Garmin Catalyst device, select
3
On your Garmin Catalyst device, verify Bluetooth wireless
technology is enabled.
4
On your headset, enable Bluetooth wireless technology and
make it visible to other Bluetooth devices.
5
Select your headset from the list of devices.
TIP: if your headset does not appear in the list, you can
select
> Refresh to refresh the list of Bluetooth devices.
6
Follow the on-screen instructions to complete the pairing
process.
Display settings
Select
> Display.
Brightness Level: sets the display brightness level on your
device.
Adaptive Brightness: automatically adjusts the backlight
brightness based on the ambient light when the device is out
of the mount.
Sleep: allows you to set the amount of idle time before your
device enters sleep mode while using battery power.
Screenshot: allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Sound and Notification Settings
Select
> Sound & notification.
Volume Sliders: set the volume levels for audio features.
Other sounds: allows you to enable or disable sounds for other
device interactions, such as screen touches, screen locking
or charging.
Adjusting Sound and Notification Volume
1
Select
> Sound & notification.
2
Use the slider bars to adjust the sound and notification
volume.
Setting the Text Language
You can select the language for text in the device software.
1
Select
> Language & input > Language.
2
Select a language.
Date and time settings
Select
> Date & Time.
Automatic time zone: automatically sets the time zone based
on information from the connected network.
Select time zone: sets the time zone on your device when
Automatic time zone is disabled.
Use 24-hour format: enables or disables the 24-hour time
format.
Device settings
Select
> About device.
> Bluetooth.
7
Advertisement
Table of Contents
