The Wps Screen - ZyXEL Communications VMG Series User Manual

Table 38 Network Setting> Wireless > MAC Authentication (continued)
LABEL
Cancel
Apply

7.5 The WPS Screen

WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. To set up a WPS connection between two devices, both
devices must support WPS. It is recommended to use the Push Button Configuration (PBC) method if your
wireless client supports it. See
Note: The Zyxel Device applies the security settings of the SSID1 profile (see
page
mode of SSID1 to WPA2-PSK or No Security.
Note: If WPS is enabled, UPnP will automatically be turned on.
Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and makes it turn
blue. Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 62 Network Setting > Wireless > WPS
Chapter 7 Wireless
DESCRIPTION
Click Cancel to exit this screen without saving.
Click Apply to save your changes.
Section 7.10.8.3 on page 146
122). If you want to use the WPS feature, make sure you have set the security
VMG/XMG Series User's Guide
for more information about WPS.
131
Section 7.2 on