Additional Disk Installation Procedure - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 5 Installing Optional Products
5.1 Installing Disks
■
About shock
5.1.4

Additional Disk Installation Procedure

This section describes how to install additional disks in the ETERNUS DX Disk storage system.
■
2.5" disks
Procedure
1
2
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do Not
CAUTION
• Do not lay the disks directly on a desk or similar hard surface. Always
use a rubber mat or other soft material to cushion the disks against
physical shocks.
• Do not stack disks or stand disks on end.
• Do not apply external force to the interface connectors.
• Do not knock or drop the disks on hard objects.
Do
CAUTION
• If additional disks are installed in a way other as described in this
section, damage and/or device failure or electrical shock may occur.
Do Not
• Do not install disks that are for use in other devices.
Check that all components of the ETERNUS DX Disk storage system are in
normal status, using the Storage System Status screen of ETERNUS Web GUI.
Wear a wrist strap or touch a metal part to discharge the human body's natural
static electricity.
Copyright 2013 FUJITSU LIMITED
58
P3AM-5512-05ENZ0