Fujitsu ETERNUS DX60 S2 User Manual page 59

Chapter 5 Installing Optional Products
5.1 Installing Disks
3
4
4-1
4-2
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Remove the dummy disk unit from the slot in which the disk is to be installed.
Simultaneously push into the tabs in the upper and lower parts of the dummy disk unit, and
pull it straight out of the disk slot.
Dummy disk unit
Tabs
The removed dummy disk unit should be retained for future use.
IMPORTANT
Install the new disk.
Press the catch on the disk lock lever to unlock it.
Catch
Lock lever
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
Hold the disk with both hands to protect against jarring.
IMPORTANT
Copyright 2013 FUJITSU LIMITED
59
P3AM-5512-05ENZ0