Powering On; Figure 2.4 Off Position (Marked "O") Of The Main Line Switches On A 2U Power Distribution Unit - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 2 Standard Operations
2.1 Powering On and Off
●
For 2U power distribution unit
Figure 2.4
IMPORTANT
2.1.2

Powering On

This section explains how to turn on the ETERNUS DX Disk storage system.
There are two ways to turn the power on:
• Via the Power switch
Press the Power switch to turn on the ETERNUS DX Disk storage system.
• Via the power synchronized unit
Use the power synchronized unit to turn on the ETERNUS DX Disk storage system.
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Main line switch
OFF position (marked "O") of the main line switches on a 2U power distribution
unit
When turning the main line switch to "On" (marked "I") right after turning the
main line switch to "Off" (marked "O"), turn it back to "On" (marked "I") after
the POWER LED of the power supply unit has turned off completely.
Before turning on the ETERNUS DX Disk storage system, make sure that
the main line switches of the power distribution units are "ON".
Do not turn the main line switches of the power distribution units to the OFF
position.
32
Copyright 2013 FUJITSU LIMITED P3AM-5512-05ENZ0