Software Driver Selection; Completing Printer Setup - Compuprint Z03 User Manual

4. Reconnect the printer power cord.
5. Power on the printer and verify normal operation (see "Turning on the printer"

Software Driver Selection

At this point it is necessary to configure your printer for your application package.
The installation procedures depend upon the host environment.
In a WINDOWS environment the printer supports the Plug & Play feature.

Completing printer setup

Your 4247 Printer is now ready to use with the configuration parameters set to
manufacturing defaults. The exception is that you have selected new defaults for
display language.
To change printer configuration parameters, see the following section of the 4247
Model Z03 Printer: User's Guide:
v Chapter 2, "Understanding the operator panel" for information on operating the
v Chapter 3, "Checking and changing configuration parameter values" for
Controller Board with parallel interface and
Ethernet 10/100 LAN interface.
on page 17).
printer,
configuration information,
Controller Board with parallel interface,
Serial interface, and USB interface.
Setting up the 4247 Model Z03 Printer
29