Compuprint Z03 User Manual page 33

5. Move the right tractor until the right sprocket holes of the form fit on the
right tractor pins. Ensure that the forms go under the forms jam sensor and
that the forms are straight.
6. Close the right tractor sprocket cover.
7. To position the paper for the first column printing, move both tractors
aligning the left edge of the form with the 11
Note: Aligning the left-hand edge of the paper past the 22
printer cabinet will cause the paper to be misaligned with the Paper
Load Sensor resulting in a '001 End of Forms' error.
th
spacer on the printer base.
nd
spacer on the
Setting up the 4247 Model Z03 Printer
21