Setting The Printer To Power Save Mode; Types Of Power Save Mode - Canon Color imageRUNNER LBP5975 User Manual

Setting the Printer to Power Save Mode

There are the following four methods for setting the printer to Power Save Mode.
Setting the printer to Power
Save Mode automatically
when it is not operating
Setting the printer to Power
Save Mode using the printer's
control panel
Setting the printer to Power
Save Mode from a network
computer
Setting the printer to Power
Save Mode on the designated
time every day
If the above operations or settings are performed, and the entering conditions
described in "Types of Power Save Mode" (See p. 2-7) are fulfilled, the printer is set
to Power Save Mode which consumes less power.

Types of Power Save Mode

There are the following three types of Power Save Mode, and they vary in the
entering conditions.
Settings for "POWER SAVE MODE"
Types of
Power Save
Mode
OFF
Power Save
Mode 1 (the
Panel Off
-
mode)
Power saving
effect: Small
Specify the time interval until the printer enters Power
Save Mode in POWER SAVE TIME. You can specify the
time interval between 5 to 180 minutes. The default is 10
minutes.
Press the control panel power switch (sub power supply)
on the printer's control panel.
Select the option in the Remote UI in the following order:
[Device Manager] ➞ [Status] ➞ [Device Control] ➞
[Power Save], then click [Execute].
Specify the time when the printer is to enter Power Save
Mode in POWER SAVE TIME.
If POW. SAVE TIMER is set to ON, POWER SAVE TIME
is enabled.
Which Can be Entered
PANEL
ON
OFF
Entering Conditions
DEEP
SLEEP
- Panel operation has not
been performed.
- No data has been sent from
the computer.
- The printer is not starting up.
- A shutdown is not being
performed.
- The hard disk is not being
initialized.
Turning the Printer ON/OFF
2
2-7