Remedy 2 Press [Feeder Selection], select a paper source from which paper of the
specified size or type can be fed, then load paper.
Remedy 3 Specify the settings for STD PAPER SIZE and STD PAPER TYPE in the
FEEDER MENU options in the SETUP menu to the size or type of paper that
can be loaded in the paper source.
Remedy 4 Press [Online], then print from the currently selected paper source. However,
this may result in deterioration in print quality.
<18 NO CASSETTE 1>
Cause
Cassette 1 is not set.
Remedy 1 Set Cassette 1. (See "Loading Paper in the Paper Cassette," on p. 3-18)
Remedy 2 Press [Feeder Selection], then select the multi-purpose tray. (See "Selecting a
Paper Source," on p. 3-12)
<18 NO CASSETTE 2>
Cause
Cassette 2 is not set.
Remedy 1 Set Cassette 2. (See "Loading Paper in the Paper Cassette," on p. 3-18)
Remedy 2 Press [Feeder Selection], then select the multi-purpose tray. (See "Selecting a
Paper Source," on p. 3-12)
<18 NO CASSETTE 3>
Cause
Cassette 3 is not set.
Remedy 1 Set Cassette 3. (See "Loading Paper in the Paper Cassette," on p. 3-18)
Remedy 2 Press [Feeder Selection], then select the multi-purpose tray. (See "Selecting a
Paper Source," on p. 3-12)
<1D CHECK STAPLER> (LBP5975 Only)
Cause 1
The staples in the staple cartridge ran out.
Remedy
Replace the staple cartridge with a new one. (See "Replacing the Staple
Cartridge (LBP5975 Only)," on p. 6-62)
Cause 2
The staple cartridge is not installed.
Remedy
Install the staple cartridge. (See "Replacing the Staple Cartridge (LBP5975
Only)," on p. 6-62)
Message List
7-35
7