5
2
2-26
Direct Print
Specify the settings for [Print Settings] as the following, as
needed.
[Color Mode]
Specifies whether to print in color or in black and white.
[Resolution]
Specifies the resolution for when processing print data.
[Copies]
Enter the number of copies (1 to 9999) to be printed.
[2-Sided Printing]
Specifies whether the printer should perform automatic
2-sided printing. If the check box for this option is
selected, the printer prints on both sides of the paper.
[Binding Location]
Select the binding location for 2-sided printing from
[Short Edge] and [Long Edge].
[Staple] (Only
If the check box is selected, printed paper is output
when an optional
stapled.
hard disk is not
installed in
LBP5975)
[Finishing]
If you select [Off], printouts of a complete job are
grouped. If you select [Collate], printouts of a complete
job are collated.
Also, if you select [Staple + Collate] (LBP5975 only), data
is printed in page order, and the printouts are stapled.
[Store In Box]
If you want to store the data on the hard disk (boxes) of
the printer, select the check box for this option, and then
select the box to store the data.