Canon Color imageRUNNER LBP5975 User Manual page 399

3
Utility
Settings
OK
Utility 4
Settings
OK
Utility 5
Settings
6
OK
6
Utility
Settings
OK
Online
7
6-76 Adjusting the Printing Position
Select USER MAIN. using [
USER MAIN.
ADJ.START POS. →
The options for USER MAIN. are displayed.
Select ADJ.START POS. using [
ADJ.START POS. →
OFFSET Y
The settings for the printing position are displayed.
Select the paper source that you want to check the printing
position using [ ] and [ ], then press [OK].
OFFSET X(CASS1)→
=0.0
Specify the target numeric value using [
press [OK].
Next, check the printout results of the Printing Position Adjustment Print and
select the numerical value to adjust the position.
Each time you press [
time you press [ ], the value decreases in - 0.01 in. increments. If you keep
holding down [ ] or [
-0.20
=-0.20
"=" is displayed on the left of the value, and the printing position is specified.
Press [Online].
USER MAIN.
00 READY LT
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
→
], the value increases in + 0.01 in. increments, and each
], the speed of the value changing is increased.
→
] and [ ], then