Printing With A Gutter - Canon Color imageRUNNER LBP5975 User Manual

Printing with a Gutter

You can print with a margin for a gutter applied to an edge of paper. When applying
a gutter, specify the location (long edge or short edge) and the width (maximum:
1.97 in. (50mm)).
Binding location for when using
paper in portrait orientation
Front
(2-sided printing)
ABC
ABC
ABC
ABC
IMPORTANT
If any part of the print image lies outside the printable area after creating the gutter, the
part will be missing.
NOTE
In the printer driver, selecting the edge to be bound specifies the (+) or (-) direction.
•
For automatic 2-sided printing, the edges to be bound on both sides of paper are
•
automatically determined.
The settings for OFFSET Y and OFFSET X are enabled regardless of the settings for a
•
gutter. Because of this, gutters on both sides of paper may be skewed if the settings for
OFFSET Y and OFFSET X are specified for 2-sided printing.
Back
BIND.LOCATION : LONG EDGE
DEF
GUTTER : + direction
BIND.LOCATION : LONG EDGE
DEF
GUTTER : - direction
BIND.LOCATION : SHORT EDGE
DEF
GUTTER : + direction
BIND.LOCATION : SHORT EDGE
DEF
GUTTER : - direction
Binding location for when using
paper in landscape orientation
Front Back
(2-sided printing)

Printing with a Gutter

3
3-67